Ekahau Positioning Engine recognizes the TB tag’s button presses as different scan reasons: TB user interface 1. Tag Operation 22 Exposure to a strong permanent magnet may cause false Safety Switch alarms! Typ- ically these parameters are used to improve accuracy in very difficult conditions or in cases the tag otherwise would scan rarely. It is not recommended to use the feature, if not required, due to higher power consumption.
|Date Added:||3 October 2014|
|File Size:||49.43 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Do not operate the tag outside this temperature range. Operation is subject to the following two conditions: I’ve checked the in-built Airport from PowerBook 5. The Ekahau Positioning Engine software continuously reports the tag coordinates and logical areas within the Wi-Fi coverage area both indoors and outdoors.
Person responsible for making this declaration: Director, Product Sl54sc Date: TB user interface 1. Initial Activation of the Tag You can find the latest supported Wi-Fi adapters from our website http: Used to improve the accuracy in difficult conditions and for rarely scanning applications.
NEC Aterm Wireless Software Download
Install a supported Wi-Fi adapter using sl54sc driver provided by Ekahau. Certifications 6 Certifications 6. The contents of this document are provided “as is.
To continue using the tag after resetting, you have to re-activate it following the instructions explained in chapter Activation Procedure on page 7. The tag will appear in the system again when it report it’s location next aherm. Just open the PowerBook up – take away the battery, remove the AirPort Extreme card from its place and see what’s written on it.
Ekahau reserves the right to revise this document or withdraw it at any time without prior notice. Connecting the tag with a charger The TB tag is delivered with the battery charged to a storage charge, and it is recommended to fully charge the batteries before first time activating the tag.
Can anyone confirm using A successfully with MorphOS?
Full text of “MetaGeek Ekahau Site Survey”
A” then it won’t work. Free text Wl54ac 3. OK, what I’ve figured out so far: Unless the internal antenna is crippled somehow, but I find it hard to believe, as as I’ve said earlier the card just works on OSX. Initial Activation of the Tag 14 Figure 2. Typ- ically these parameters are used to improve accuracy in very difficult conditions or in cases the tag otherwise would scan rarely. The TB tags are delivered with the battery charged to a storage charge, it is recom- mended to fully charge the battery, before activating the tags first time.
TB Table of Contents 1 Introduction 1 1.
Initial Activation of the Tag 6 Brand Model It is not recommended to use the feature, if not required, due to higher power consumption. Repeat this for all the tags to be activated. If this equipment does cause harmful interfer- ence to radio or television reception, wl54ec can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: To remove the charger plug, release the plug by pressing the latches on the plug and pull the plug out.
Recommendations for optimizing battery lifetime: If the tag battery is completely empty, the tag will automatically turn off. Hi I have a PowerBook 5. Configuration After Initial Activation 3 Configuration After Initial Activation The tag can be adjusted for each application and network settings by adjusting a set of parameters. For more wl54xc, please atdrm to Ekahau Vision user guide.